- Material Specifications: All materials used are AISI 304 quality stainless steel. - Feeding Mechanism: In the feed, 4 spirals, 4 gears, and a 1.5 kW motor are used. It is driven by a reducer with adjustable speed (d/min), controlled via inverter from the PLC screen. - Feeding Chamber Surface Options: The feeding chamber and augers should not be sandblasted. Alternatively, Teflon coating can be preferred. - Mold Outlet Options: Two different mold outlets can be replaced with a bolted system to form tongue or cecil cheese dough. - Water Temperature Control: With the PT100 sensor, the water temperature on the supply wall can be controlled from the PLC screen. - Water Heating System: The water on the wall of the feeding chamber is heated by a pipe serpentine system with a steam supply controlled by a pneumatic valve. - Steam Energy Recovery: The water vapor condensed in the system is discharged via a trap for steam energy recovery. - Conveyor Belt Drive System: The conveyor modular belt system is driven by a reducer (… kW, … d/min), and its speed can be controlled. - Water Filtration and Circulation: A coarse filter is located in the lower water pool of the conveyor, and the drip water is circulated with a pump of … L/h capacity. - Cutting Table Material: PE1000 material is used for the cutting tool table. - Cheese Length and Cutting Control: Cheese lengths can be controlled from the PLC screen by timing with the encoder system and a stainless cutting knife connected to a pneumatic piston. - Conveyor Mobility: The conveyor includes 2 idlers and 2 lockable wheels.